Combines vacuum with full jetter capabilities
Vac-Tron’s Mini-Combo is one of the most versatile machines on the market today.
Municipal and contractor applications include:
- Storm drain, lift station, and manhole clean out
- Lateral line clean out (recommended for up to 12” laterals)
- Culvert cleaning
- Meter box cleaning
- Potholing (soft dig to find underground utilities)
Jetter
- Electric clutch with on/off control and low-water automatic shut-down
- 15 gpm @ 2000 psi Cat Pump (Industrial grade)
- 300 gal (1200 L) (2) 150 gallon poly tanks 4000 psi pressure gauge
- Belt-drive system off main engine
- High-pressure safety pop-off valve
- Bullet jetter nozzle
- 300’ (152 m) of 1/2” (1 cm) Jetter hose
- Heavy-duty, 12-volt hose reel (with motor-speed control)
- Secondary self retracting hose reel with 50’ of high-pressure hose for potholing and cleaning
- 5’ (1.5 m) roto wand and control handle
- 3’ (0.9 m) variable nozzle wand for clean up
- 8-gal (30 L) semi-automatic antifreeze system
Specs
MC 555/855 SDT (trailer mounted)
- 49 HP (36.5 Kw) water-cooled, diesel engine
- 1000 CFM vacuum pump capable of 15 inches of mercury
- 500/800 gal (1893 L) debris tank with hydraulic lift dump
- Reverse pressure for off-loading liquids and purging vacuum hose
- Hydraulically operated, full-open rear door
- Hydraulically locked rear door
- 33’ (10 m) of 3” (7.6 cm) lightweight, smooth-bore rubber suction hose – (industrial rated)
- Two 3” (7.6 cm) lightweight dielectric suction wands – 4’ (1.2 m) & 6’ (1.8 m)
- Empty weight of 555: 3,700 lb (1678 kg) (w/o trailer)
- Empty weight of 855: 3,900 lb (1724 kg) (w/o trailer)
Specs (cont.)
General
Lockable curbside remote controls
Hydraulic pump and hydraulic cylinder with remote controls
to raise tank 60 degrees
6” (15 cm) brass rear discharge valve
Max overall height 7’
- 6” (15 cm) stainless steel portal shut-off in top of vacuum tank
- 15 gal (114 L) fuel tank with fuel gauge located in curbside control panel
- 6” (15 cm) amber strobe with two adjustable halogen work lights mounted at rear of tank
- (2) DOT safety cones with holder
- UHMW tank liner on bottom of debris tank
- Battery with nationwide warranty
- Two-year factory warranty
Trailer
- Tandem Dexter torsion axles
- GVWR at 19,000 lb (9072 kg) on MC855 and 14,000 GVWR on MC555
- 10,000 lb (4535 kg) jack stand with spring-loaded foot
- Empty weight is 2,975 lb (1576 kg) -trailer only
- 8” I-Beam construction
- Pintle hitch
- Electric brakes on both axles, with safety break away
- MC855 tires: 4 – 245/70R 17.5 F tires with 8-lug wheels
- MC555 tires: 4 – LT235/85R 16 G tires with 8-lug wheels
Engine Closure
- Fully enclosed and insulated to eliminate noise and vibration using 2/3 open-cell attenuation material
- Hinged access doors on both sides of engine-stand for maintenance and service
- All service points for engine are accessible from curbside
- Silencer for vacuum pump (mounted within the enclosure
and not to exceed 80 DBA at full performance)
Boom (Optional)
- 4” (10 cm) suction hose
- 6-way movement
- Completely self-contained
- Hydraulic in/out/up/down
- Safe tank-mounted nesting area
- 360-degree movement
Filtration- Best in the industry
- Bag House (Big Red) – with 100 square feet filtration media, combined with 10 gal (38 L) water trap
- Filtration cylinders are washable and removable
- WET or DRY industrial filters rated at 5:1 air cloth ratio and grain loading of 30-g/acf using 0.5-micron silica dust emissions of .0060 g/acf
Dimensions
- MC555: Length: 18.5’ (5.6 m), Width: 90” (228.6 cm),
Height: 83” (210.8 cm) - MC855: Length: 21.5’ (6.6 m), Width: 90” (228.6 cm),
Height: 83” (210.8 cm)
Control Panel
- Waterproof and lockable
- Vacuum pressure gauge
- Fuel gauge
- Key switch
- Electronic throttle switch
- Water pump switch
- Lights and DOT strobe controls
- Volt Meter
- Hour meter
- Fuses for water pump and lights
- Oil Pressure gauge
- Water temperature gauge








